TL866

NOTE: these pages were imported from minipro wiki

This wiki is dedicated to gathering information about the AutoElectric MiniPro TL866 programmer.

The TL866 is a universal EEPROM, FLASH, 8051, AVR, MCU, GAL, PIC, SPI chip programmer supporting around 13,000 chips.

Pages

Category:TL866

• Tl866 supported chips
• Tl866 sellers
• Hardware
  • Tl866 design
  • Tl866 TSOP48 adapter
• Software
  • Autoelectric Minipro : vendor provided Windows client
  • Vdudouyt Minipro : FOSS Linux client
  • Radioman TL866 updater : firmware updater tool
  • opentl866 : FOSS firmware

Difference between TL866A and TL866CS

There're two version of the TL866 programmer, the TL866A with ICSP header and TL866CS without ICSP.

TL866A has the ICSP header and TL866CS does not, otherwise the devices are physically the same. The TL866CS is also factory programmed to not use the ICSP header.

This means that TL866A supports (in addition to all the chips TL866CS supports):

• Microchip ICSP support for some chips (in circuit programming)
• ICSP support for ATmega and SYNCMOS MCU SM89xxx SM59xxx (in circuit programming)
• AT45DBxxxx ICSP, programmable only on TL866A

Counterfeit programmers

There have been reports of a counterfeit version of the tl866 out of aliexpress. If you end up with one of these the official software will detect it and erase the contents of the PIC onboard. It is theorized that the detection is due to sloppy piracy resulting in the serial number of all the fakes being the same. To restore your device you now need to go though the operation to upgrade it to a tl866a.

ICSP

ICSP connections are usually deductible from the MiniPro software.

You select the chip, click the ICSP programming option (if available) and then the Information button. This will display a image with the appropriate connections.

The images are also available in the img directory in your MiniPro directory

Handy helper image

Source. Thanks radioman!

Schematic

The schematic in PDF format is available in TL866_schematic.pdf by Radioman.

It's intended use is a better understanding of the TL866 internal workings and is available here purely for experimental and educational purposes.