SWD

From Proghq
Revision as of 16:34, 26 October 2021 by Mcmaster (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

STLinkV3

There's also voltage isolation accessory "B-STLINK-VOLT"

Connectors:

  • STDC14: 14 pin main connector. 7x2, 1.27 mm pitch
    • You can snap off the top and bottom pins to mechanically and electrically convert to MIPI10 if you really don't need the higher performance
  • MIPI10: STLinkV2 connector. 5x2, 1.27 mm pitch
  • MIPI20


Tag connect

https://www.tag-connect.com/debugger-cable-selection-installation-instructions/stlink-v3set

TLDR: I should have used TC2030-CTX-STDC14, but was sent TC2030-CTX. I can snap STLinkV3 pins to make them compatible if in a bind

Retrieved from "https://proghq.org/w/index.php?title=SWD&oldid=819"