DuPAL

From Proghq
Revision as of 06:25, 21 May 2022 by Mcmaster (talk | contribs)
Jump to navigation Jump to search

WIP

Pre-compiled: https://proghq.org/media/dupal/


Building

Optiboot

# https://github.com/Optiboot/optiboot

# 328P uses 115200?
# a few use 57600 but not the one we need :(
# wget https://github.com/Optiboot/optiboot/releases/download/v8.0/Optiboot-8.0.zip

git clone https://github.com/Optiboot/optiboot.git
cd optiboot
git checkout -b v8.0 v8.0
cd bootloaders/optiboot
make atmega328 AVR_FREQ=20000000L LED_START_FLASHES=8 BAUD_RATE=57600
# sha1sum optiboot_atmega328.hex
# 8a16ce8d98d7bf002c54c7aa911bfd124d9e1961  optiboot_atmega328.hex

Flash optiboot. Example CLI to use ISP header, but can also put into tl866 etc

Sample command line:

avrdude  -c dragon_isp -P usb \
   -p atmega328p -e -u -U efuse:w:0xFD:m -U hfuse:w:0xDE:m \
   -U lfuse:w:0xFF:m -U flash:w:optiboot_atmega328.hex

Sample output

Originally I tried using BP Microsystems but didn't work. I then flashed using avrdude / header and worked (green LED blinking).

TODO: dump end flash so can program using bp

cd DuPAL_Firmware
make
make program