Difference between revisions of "BPM Programmer"

From Proghq
Jump to: navigation, search
(22 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
[[Category:Programmer]]
 
[[Category:Programmer]]
 
[[Category:Hardware]]
 
[[Category:Hardware]]
−
= BP series =
 
  
−
<code>
 
−
(11:36:56 PM) Lord_Nightmare: the main processor [of the bp1200] is an 80286-16, with a 32mhz xtal
 
−
(11:37:07 PM) Lord_Nightmare: [the board labeled] std48, it would [I assume] normally have [std48] printed on it nicely
 
−
(11:37:22 PM) Lord_Nightmare: this one was a refurbished unit and i guess they used an unprinted metal case for that pcb
 
−
(11:37:37 PM) Lord_Nightmare: std48 is the 'relay pcb'
 
−
(11:37:38 PM) digshadow: but whats the point
 
−
(11:37:52 PM) Lord_Nightmare: i think it controls which pins are powered with what [rail] but am not sure
 
−
(11:38:06 PM) digshadow: gotcha
 
−
(11:38:07 PM) Lord_Nightmare: the bp1200 it is a 'separate' pcb on top of the unit
 
−
(11:38:13 PM) digshadow: but its basically part of the unit right
 
−
(11:40:54 PM) Lord_Nightmare: the bp1600 has the 'relay board' integrated as a board which sits on top of the rest of the inside of the unit inside the case
 
−
(11:41:16 PM) Lord_Nightmare: i think the 1400 does as well
 
−
(11:41:33 PM) Lord_Nightmare: while on the 1200 it sat on top of the unit
 
−
(11:46:35 PM) Lord_Nightmare: the most basic bp unit was the bp-1148 "device programmer"
 
−
(11:46:55 PM) Lord_Nightmare: note the case is identical to the 1200, and the only difference [in appearance] is 'universal' is blacked out on the wording
 
−
(11:47:11 PM) Lord_Nightmare: http:''vertassets.blob.core.windows.net/image/107fdcf5/107fdcf5-2dad-11d4-8c3d-009027de0829/bp1148.jpg
 
−
(11:47:46 PM) Lord_Nightmare: that picture is a mockup, the std48 'layer' is missing
 
−
(11:48:11 PM) Lord_Nightmare: http:''thumbs.ebaystatic.com/d/l225/m/m1qMyAgqacqzlOo4KbeZLcw.jpg shows an actual 1148
 
−
</code>
 
  
 +
=BP series=
  
−
== BP-1200 ==
+
{| class="wikitable"
 +
!Vendor
 +
!Model
 +
!Year
 +
!Motherboard
 +
silkscreen
 +
!Motherboard
 +
CPU
 +
!Motherboard
 +
RAM
 +
!Motherboard
 +
FPGA sticker
 +
!Card
 +
Model
 +
!Tech adapter
 +
silkscreen
 +
!Power supply
 +
!Accessory
 +
!Last BPWin
 +
!Note
 +
|-
 +
|Actel
 +
|SS2
 +
|2001
 +
|CPCB12A Rev. C
 +
|Intel FC80486DX4100
 +
|Populated
 +
|U5
 +
W42MX24A
 +
BP MICROSYSTEMS
 +
09/20/02
 +
|CPCBPD8B Rev B
 +
2001
 +
|CPCBVLTA REV. B
 +
2000
 +
|
 +
|Button
 +
|
 +
|mcmaster
 +
|-
 +
|Actel
 +
|SS3
 +
|2008-05-12<br />
 +
|WWAV12F
 +
REV.F M0309
 +
 
 +
 
 +
ASSY WWAV12F
 +
|Intel UG80486DX4100
 +
|SO DDR
 +
Populated
 +
 
 +
 
 +
CENTON
 +
 
 +
512 MB
 +
|
 +
|CPCBPD8B Rev B
 +
2001
 +
|
 +
|SWG
 +
CEM-??
 +
 
 +
 
 +
CEL-22-LF000000006246
 +
 
 +
REV-A1
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1148
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1200
 +
|1992
 +
|BP-1200 Rev C
 +
|AMD N80L286-16/S
 +
|N/A
 +
|
 +
|CPCBPD8 Rev. D
 +
|
 +
|INTEGRATED POWER DESIGN<br />
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1400/84
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1400
 +
(1400/240)
 +
|
 +
|CPCB11 Rev. G
 +
|80C286
 +
|
 +
|
 +
|
 +
|CPCBTA240V REV. D
 +
|29203118-C2
 +
REV-C C2
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1410/84
 +
|2005
 +
|CPCBD03223 Rev. F
 +
2005
 +
|Intel 80486DX4100
 +
|SO DDR
 +
Unpopulated
 +
|N/A
 +
|CPCBPD8B Rev B
 +
2001
 +
|2002 BP MICROSYSTEMS
 +
|Model?
 +
Looks like SS3
 +
 
 +
CEL-22-000000001560
 +
 
 +
E145540, CS155-F3
 +
 
 +
HP-OK, REV A
 +
|
 +
|
 +
|mcmaster
 +
|-
 +
|BPM
 +
|1410
 +
(1410/240)
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1600
 +
|
 +
|CPCB12A Rev. C
 +
|Intel 80486DX4100
 +
|
 +
|(handwritten)
 +
MUS
 +
28781
 +
|
 +
|CPCBVLTA REV. B
 +
|29203118-C2
 +
REV-C C2
 +
|
 +
|5.33.0
 +
|
 +
|-
 +
|BPM
 +
|1610
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1700
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|1710
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2000
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2100
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2200x4/240
 +
|1998
 +
|CPCB11 Rev. F
 +
1998
 +
|Harris CS80C286-16
 +
|
 +
|
 +
|CPCBPD8A Rev D
 +
1997
 +
|Top
 +
CPCBTA240V REV. D
 +
 
 +
1996
 +
 
 +
 
 +
Bottom
 +
 
 +
CPCBTA240V Rev. D
 +
 
 +
1996
 +
|29203118-C2
 +
REV-C C2
 +
|
 +
|4.73.0
 +
|mcmaster
 +
REV vs Rev is inconsistent even on the same PCB...
 +
|-
 +
|BPM
 +
|2500
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2510
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2600
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2600M
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2610
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2700
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2700M
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2710
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|-
 +
|BPM
 +
|2800F
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|
 +
|}
 +
General notes:
 +
 
 +
* The following are the same basic hardware
 +
** BP-1400, BP-2200
 +
** BP-1410, SS3
 +
** BP-1600, SS2
 +
* Power supplies
 +
** Three generations
 +
 
 +
<br />
 +
  (11:36:56 PM) Lord_Nightmare: the main processor [of the bp1200] is an 80286-16, with a 32mhz xtal
 +
  (11:37:07 PM) Lord_Nightmare: [the board labeled] std48, it would [I assume] normally have [std48] printed on it nicely
 +
  (11:37:22 PM) Lord_Nightmare: this one was a refurbished unit and i guess they used an unprinted metal case for that pcb
 +
  (11:37:37 PM) Lord_Nightmare: std48 is the 'relay pcb'
 +
  (11:37:38 PM) digshadow: but whats the point
 +
  (11:37:52 PM) Lord_Nightmare: i think it controls which pins are powered with what [rail] but am not sure
 +
  (11:38:06 PM) digshadow: gotcha
 +
  (11:38:07 PM) Lord_Nightmare: the bp1200 it is a 'separate' pcb on top of the unit
 +
  (11:38:13 PM) digshadow: but its basically part of the unit right
 +
  (11:40:54 PM) Lord_Nightmare: the bp1600 has the 'relay board' integrated as a board which sits on top of the rest of the inside of the unit inside the case
 +
  (11:41:16 PM) Lord_Nightmare: i think the 1400 does as well
 +
  (11:41:33 PM) Lord_Nightmare: while on the 1200 it sat on top of the unit
 +
  (11:46:35 PM) Lord_Nightmare: the most basic bp unit was the bp-1148 "device programmer"
 +
  (11:46:55 PM) Lord_Nightmare: note the case is identical to the 1200, and the only difference [in appearance] is 'universal' is blacked out on the wording
 +
  (11:47:11 PM) Lord_Nightmare: http://vertassets.blob.core.windows.net/image/107fdcf5/107fdcf5-2dad-11d4-8c3d-009027de0829/bp1148.jpg
 +
  (11:47:46 PM) Lord_Nightmare: that picture is a mockup, the std48 'layer' is missing
 +
  (11:48:11 PM) Lord_Nightmare: http://thumbs.ebaystatic.com/d/l225/m/m1qMyAgqacqzlOo4KbeZLcw.jpg shows an actual 1148
 +
 
 +
ECO: WWAV20-4
 +
 
 +
*<nowiki>http://www3.bpmmicro.com/web/helpandsupport.nsf/69f301ee4e15195486256fcf0062c2eb/66634b97cb53c22e8625703e0062b99a!OpenDocument</nowiki>
 +
*Effect 1: ECO: WWAV20-4 Effect 2: CPCB11 Rev A-F - TA-84 will occasionally fail relay test
 +
 
 +
 
 +
 
 +
<nowiki>http://www3.bpmmicro.com/web/helpandsupport.nsf/WebKeys/BPM-7Q2R96!OpenDocument</nowiki>
 +
{| class="wikitable"
 +
|BP-1148, BP-1200, BP-2000, BP-2100, BP-2500, BP-2510, BP-2600M Final Software Version<br />
 +
|-
 +
|
 +
|-
 +
|Legacy Programmer Last Software Version Reference<br />
 +
|-
 +
|
 +
|-
 +
|Per the following document, the final BPWin version for the legacy programmers listed above is BPWin 4.73.
 +
<nowiki>http://www3.bpmicro.com/Web/helpandsupport.nsf/WebKeys/BPM-6AHS6M?opendocument&Cat=FAQ</nowiki>
 +
 
 +
You can download BPWin 4.73 from our software download page by clicking the "BPM Legacy Software Download" link in the upper-left corner of the page.
 +
<br />
 +
|}
 +
 
 +
==BP-1200==
  
  
Line 49: Line 491:
 
Chip interface: 2 plug SM
 
Chip interface: 2 plug SM
  
−
http:''atariage.com/forums/topic/142884-bp-microsystems-eprom-programmer-a-cry-for-help/
+
http://atariage.com/forums/topic/142884-bp-microsystems-eprom-programmer-a-cry-for-help/
−
* IF you get a TA-84 pin driver module (and a SM48D 48-pin DIP module, but  NOT the one that comes with the BP-1148) it will convert your BP-1148  to a BP1200/84.
+
 
 +
*IF you get a TA-84 pin driver module (and a SM48D 48-pin DIP module, but  NOT the one that comes with the BP-1148) it will convert your BP-1148  to a BP1200/84.
  
−
== BP-1400 ==
+
==BP-1400==
  
 
PC interface: parallel port
 
PC interface: parallel port
Line 58: Line 501:
 
Chip interface: 3 plug SM
 
Chip interface: 3 plug SM
  
−
BP-1400/84: [[http:''web.archive.org/web/20061119190006/http:''www.bpmicro.com/products.nsf/7df54a7a9b18958d862566710079b2a0/cd8e1e770bf83c0e862569510070a6cf/$FILE/1400-84%20Data%20Sheet.pdf]]
+
BP-1400/84: [http://web.archive.org/web/20061119190006/http://www.bpmicro.com/products.nsf/7df54a7a9b18958d862566710079b2a0/cd8e1e770bf83c0e862569510070a6cf/$FILE/1400-84%20Data%20Sheet.pdf]
 +
 
 +
 
 +
BP-1400/240: [http://web.archive.org/web/20061119190026/http://www.bpmicro.com/products.nsf/7df54a7a9b18958d862566710079b2a0/cd8e1e770bf83c0e862569510070a6cf/$FILE/1400-240%20Data%20Sheet.pdf]
 +
 
 +
 
 +
===EOL notice===
 +
 
 +
http://www3.bpmmicro.com/web/helpandsupport.nsf/WebKeys/BPM-7AUPV7!OpenDocument&Cat=Issue&Click=
 +
 
 +
End of Life for 1400 and 2200 model programmers
  
 +
Summary
 +
BPM announces the planned end of support for the 1400 and 2200 model programmers on December 31, 2008. Introduced in 1996 and discontinued in 2005, the 2200 and 1400 were the first in the industry to enable fine control of programming waveforms for the highest quality programming with the widest device support capabilities. Limitations of the original programmers hardware combined with new software compatibility and component obsolescence forces this end of support announcement.
  
−
BP-1400/240: [[http:''web.archive.org/web/20061119190026/http:''www.bpmicro.com/products.nsf/7df54a7a9b18958d862566710079b2a0/cd8e1e770bf83c0e862569510070a6cf/$FILE/1400-240%20Data%20Sheet.pdf]]
+
Details
 +
End of support means that BPWin software released in 2009 will not support the 1400 and 2200 model numbers. These models can continue to function with existing BPWin software released prior to 2009, but will not be eligible for additional algorithms or updates to existing algorithms. Hardware contracts will also not be available for these programmers. Also, repairs and calibration of these programmers are no longer possible.
  
−
=== Motherboard ===
+
 
 +
===Motherboard===
  
 
[[File:pd_bpm_bp-1400_mb1.jpg|frameless]]
 
[[File:pd_bpm_bp-1400_mb1.jpg|frameless]]
Line 74: Line 531:
  
  
−
=== Power supply ===
+
===Power supply===
  
 
[[File:pd_bpm_bp-1400_ps.jpg|frameless]]
 
[[File:pd_bpm_bp-1400_ps.jpg|frameless]]
  
  
−
== BP-1410 ==
+
==BP-1410==
  
 
[[BPM BP-1410]]
 
[[BPM BP-1410]]
Line 98: Line 555:
 
Chip interface: 3 plug SM
 
Chip interface: 3 plug SM
  
−
BP-1410/84 datasheet: [[http:''web.archive.org/web/20060321214044/http:''www.bpmicro.com/web/bphome.nsf/webpages/141084-PDF/$FILE/1410_84.pdf]]
+
BP-1410/84 datasheet: [http://web.archive.org/web/20060321214044/http://www.bpmicro.com/web/bphome.nsf/webpages/141084-PDF/$FILE/1410_84.pdf]
  
−
BP-1410/240 datasheet: [[http:''web.archive.org/web/20060321214333/http:''www.bpmicro.com/web/bphome.nsf/webpages/1410240-PDF/$FILE/1410_240.pdf]]
+
BP-1410/240 datasheet: [http://web.archive.org/web/20060321214333/http://www.bpmicro.com/web/bphome.nsf/webpages/1410240-PDF/$FILE/1410_240.pdf]
  
−
=== Motherboard ===
+
===Motherboard===
  
 
[[File:mcmaster_bpm_bp-1410_mb_overview.jpg|frameless]]
 
[[File:mcmaster_bpm_bp-1410_mb_overview.jpg|frameless]]
Line 113: Line 570:
  
  
−
== BP-1600 ==
+
==BP-1600==
  
 
External:
 
External:
Line 127: Line 584:
 
Chip interface: 3 plug SM
 
Chip interface: 3 plug SM
  
−
BP-1600 datasheet: [[http:''web.archive.org/web/20050530023158/http:''www.bpmicro.com/web/BPhome.nsf/webpages/1600-PDF/$FILE/1600DS_EN_0703.pdf]]
+
BP-1600 datasheet: [http://web.archive.org/web/20050530023158/http://www.bpmicro.com/web/BPhome.nsf/webpages/1600-PDF/$FILE/1600DS_EN_0703.pdf]
  
−
<code>
+
  1400 has a 286 and the 1410 a 486
−
1400 has a 286 and the 1410 a 486
+
  1600 supports 1.5V parts
−
1600 supports 1.5V parts
+
  5000 more devices (probably a lot more by now)
−
5000 more devices (probably a lot more by now)
 
−
</code>
 
  
−
=== Motherboard: ===
+
===Motherboard:===
  
 
[[File:mcmaster_bpm_bp-1600_mb1.jpg|frameless]]
 
[[File:mcmaster_bpm_bp-1600_mb1.jpg|frameless]]
Line 145: Line 600:
 
CPU
 
CPU
  
−
<code>
+
  intel
−
intel
+
  Intel DX4
−
Intel DX4
+
  iCOMP TM index=435
−
iCOMP TM index=435
+
  PC80486DX4100
−
PC80486DX4100
+
  L124EA01
−
L124EA01
+
  &EW 3VOLT SL2M9
−
&EW 3VOLT SL2M9
+
  INTEL (M)(C) '89 '94
−
INTEL (M)(C) '89 '94
 
−
</code>
 
  
 
Connectors are numbered with 1 at the side of the top or left of the PCB, oriented such that writing is right side up (ie side with blue trim pot)
 
Connectors are numbered with 1 at the side of the top or left of the PCB, oriented such that writing is right side up (ie side with blue trim pot)
  
 
J10 (Fan, N/C)
 
J10 (Fan, N/C)
−
{| class="wikitable sortable" border=1
+
{| class="wikitable sortable" border="1"
−
! # !! V !! Note  
+
!#!!V!!Note
 
|-
 
|-
−
| 1 || N/C? ||  
+
|1||N/C?||
 
|-
 
|-
−
| 2 || 16.5 ||  
+
|2||16.5||
 
|-
 
|-
−
| 3 || 0 ||  
+
|3||0||
 
|-
 
|-
−
| 4 || N/C? ||  
+
|4||N/C?||
 
|-
 
|-
 
|}
 
|}
Line 173: Line 626:
 
J11 (Term. 1, N/C)
 
J11 (Term. 1, N/C)
  
−
{| class="wikitable sortable" border=1
+
{| class="wikitable sortable" border="1"
−
! # !! V !! Note  
+
!#!!V!!Note
 
|-
 
|-
−
| 1 || 0.0 ||  
+
|1||0.0||
 
|-
 
|-
−
| 2 || 1.1 ||  
+
|2||1.1||
 
|-
 
|-
−
| 3 || 0.25 ||  
+
|3||0.25||
 
|-
 
|-
−
| 4 || 5.1 ||  
+
|4||5.1||
 
|-
 
|-
 
|}
 
|}
Line 191: Line 644:
 
Was this supposed to be identical to above?  Broken?
 
Was this supposed to be identical to above?  Broken?
  
−
{| class="wikitable sortable" border=1
+
{| class="wikitable sortable" border="1"
−
! # !! V !! Note  
+
!#!!V!!Note
 
|-
 
|-
−
| 1 || 0.0 ||  
+
|1||0.0||
 
|-
 
|-
−
| 2 || 0.0 ||  
+
|2||0.0||
 
|-
 
|-
−
| 3 || 0.0 ||  
+
|3||0.0||
 
|-
 
|-
−
| 4 || 0.8 ||  
+
|4||0.8||
 
|-
 
|-
 
|}
 
|}
Line 206: Line 659:
 
Voltage header
 
Voltage header
  
−
{| class="wikitable sortable" border=1
+
{| class="wikitable sortable" border="1"
−
! Label !! V !! Note  
+
!Label!!V!!Note
 
|-
 
|-
−
| +5V || 5.1 ||  
+
| +5V||5.1||
 
|-
 
|-
−
| +3.3V || 3.3 ||  
+
| +3.3V||3.3||
 
|-
 
|-
−
| GND || 0.0 ||  
+
|GND||0.0||
 
|-
 
|-
−
| -3.5V || -3.5 ||  
+
| -3.5V||-3.5||
 
|-
 
|-
−
| -5V || -5.0 ||  
+
| -5V||-5.0||
 
|-
 
|-
−
| GND || 0.0 ||  
+
|GND||0.0||
 
|-
 
|-
−
| +2.5V || 2.5 ||  
+
| +2.5V||2.5||
 
|-
 
|-
−
| PGD || 4.1 ||  
+
|PGD||4.1||
 
|-
 
|-
−
| VTH || 1.6 ||  
+
|VTH||1.6||
 
|-
 
|-
 
|}
 
|}
  
  
−
=== Power supply ===
+
===Power supply===
  
 
[[File:mcmaster_bpm_bp-1600_ps.jpg|frameless]]
 
[[File:mcmaster_bpm_bp-1600_ps.jpg|frameless]]
Line 236: Line 689:
  
 
J4 (12V fans...wtf?)
 
J4 (12V fans...wtf?)
−
{| class="wikitable sortable" border=1
+
{| class="wikitable sortable" border="1"
−
! # !! Color !! V !! Note  
+
!#!!Color!!V!!Note
 
|-
 
|-
−
| 1 || Red || 35.4 ||  
+
|1||Red||35.4||
 
|-
 
|-
−
| 2 || Red || 16.5 ||  
+
|2||Red||16.5||
 
|-
 
|-
−
| 3 || Black || 0.0 ||  
+
|3||Black||0.0||
 
|-
 
|-
−
| 4 || Black || 5.3 ||  
+
|4||Black||5.3||
 
|-
 
|-
 
|}
 
|}
  
 
J5 (to MB J4 or J20)
 
J5 (to MB J4 or J20)
−
{| class="wikitable sortable" border=1
+
{| class="wikitable sortable" border="1"
−
! # !! Color !! V !! Note  
+
!#!!Color!!V!!Note
 
|-
 
|-
−
| 1 || Purple || 35.4 ||  
+
|1||Purple||35.4||
 
|-
 
|-
−
| 2 || Orange || 16.5 ||  
+
|2||Orange||16.5||
 
|-
 
|-
−
| 3 || Black || 0.0 ||  
+
|3||Black||0.0||
 
|-
 
|-
−
| 4 || Red || 5.3 ||  
+
|4||Red||5.3||
 
|-
 
|-
 
|}
 
|}
  
 
J6 (to MB J4 or J20)
 
J6 (to MB J4 or J20)
−
{| class="wikitable sortable" border=1
+
{| class="wikitable sortable" border="1"
−
! # !! Color !! V !! Note  
+
!#!!Color!!V!!Note
 
|-
 
|-
−
| 1 || Purple || 35.4 ||  
+
|1||Purple||35.4||
 
|-
 
|-
−
| 2 || Orange || 16.5 ||  
+
|2||Orange||16.5||
 
|-
 
|-
−
| 3 || Black || 0.0 ||  
+
|3||Black||0.0||
 
|-
 
|-
−
| 4 || Red || 5.3 ||  
+
|4||Red||5.3||
 
|-
 
|-
 
|}
 
|}
  
  
−
== BP-2200 ==
+
==BP-2200==
  
 
"Concurrent Programming System"
 
"Concurrent Programming System"
Line 286: Line 739:
 
Chip interface: 4X 3 plug SM
 
Chip interface: 4X 3 plug SM
  
−
BP-2200 datasheet: [[http:''web.archive.org/web/20061119185923/http:''www.bpmicro.com/products.nsf/7df54a7a9b18958d862566710079b2a0/bc7af9c2aab5d676862566540077413c/$FILE/2200%20Data%20Sheet.pdf]]
+
BP-2200 datasheet: [http://web.archive.org/web/20061119185923/http://www.bpmicro.com/products.nsf/7df54a7a9b18958d862566710079b2a0/bc7af9c2aab5d676862566540077413c/$FILE/2200%20Data%20Sheet.pdf]
  
  
−
== Parallel to USB upgrade ==
+
==Parallel to USB upgrade==
  
−
Main page: [[bpm:WWAVUSBEPP]]
+
Main page: [[bpm_WWAVUSBEPP]]
  
  
−
== USB hub ==
+
==USB hub==
  
 
Used on gang programmers
 
Used on gang programmers
Line 304: Line 757:
 
[[File:anon_bpm_wwavusbhub_3.jpg|frameless]]
 
[[File:anon_bpm_wwavusbhub_3.jpg|frameless]]
  
−
= EP series =
+
=EP series=
  
−
== EP-1 ==
+
==EP-1==
  
 
PC interface: parallel port
 
PC interface: parallel port
Line 312: Line 765:
 
Chip interface: DIP
 
Chip interface: DIP
  
−
== EP-1132 ==
+
==EP-1132==
  
 
PC interface: parallel port
 
PC interface: parallel port
Line 318: Line 771:
 
Chip interface: DIP-
 
Chip interface: DIP-
  
−
== EP-1140 ==
+
==EP-1140==
  
 
PC interface: parallel port
 
PC interface: parallel port
Line 324: Line 777:
 
Chip interface: DIP-40
 
Chip interface: DIP-40
  
−
= PLD series =
+
=PLD series=
  
−
== PLD-1128 ==
+
==PLD-1128==
  
 
PC interface: parallel port
 
PC interface: parallel port
Line 332: Line 785:
 
Chip interface: DIP-28
 
Chip interface: DIP-28
  
−
= CP series =
+
=CP series=
  
−
== CP-1128 ==
+
==CP-1128==
  
 
PC interface: parallel port
 
PC interface: parallel port
Line 340: Line 793:
 
Chip interface: DIP-28
 
Chip interface: DIP-28
  
−
= Silicon Sculptor =
+
=Silicon Sculptor=
  
 
Actel programmers made by BPM.
 
Actel programmers made by BPM.
Line 346: Line 799:
 
As these cost less than the "real" BPM programmers, presumably can't be used with normal BPM software and/or work with other adapters
 
As these cost less than the "real" BPM programmers, presumably can't be used with normal BPM software and/or work with other adapters
  
−
== Silicon Sculptor 1 ==
+
==Silicon Sculptor 1==
  
 
Has 2 headers (left/right) that adaptors plug into
 
Has 2 headers (left/right) that adaptors plug into
Line 356: Line 809:
 
1X markings
 
1X markings
  
−
<code>
+
  Silicon Sculptor
−
Silicon Sculptor
+
  FAIL
−
FAIL
+
  ACTIVE
−
ACTIVE
+
  PASS
−
PASS
+
  START
−
START
+
  ACTEL DEVICE PROGRAMMER
−
ACTEL DEVICE PROGRAMMER
+
  BP MICROSYSTEMS
−
BP MICROSYSTEMS
+
 
−
</code>
+
==Silicon Sculptor 2==
 +
 
 +
 
 +
<nowiki>http://www.actel.com/kb/article.aspx?id=SL1039</nowiki>
 +
 
 +
*WWAV20 motherboard with pin driver boards (PD8As)
 +
*286 processor
 +
*2MB onboard RAM
 +
*an additional 4MB SIMM to support concurrency
 +
 
  
−
== Silicon Sculptor 2 ==
 
  
 
Markings:
 
Markings:
  
−
<code>
+
  Silicon Sculptor II
−
Silicon Sculptor II
+
  Actel
−
Actel
+
  FAIL
−
FAIL
+
  ACTIVE
−
ACTIVE
+
  PASS
−
PASS
+
  ACTEL DEVICE PROGRAMMER
−
ACTEL DEVICE PROGRAMMER
+
  BP MICROSYSTEMS
−
BP MICROSYSTEMS
 
−
</code>
 
  
 
[[File:anon_bpm_ss2_ext.jpg|frameless]]
 
[[File:anon_bpm_ss2_ext.jpg|frameless]]
Line 397: Line 856:
 
[[File:anon_bpm_ss2_int_mez.jpg|frameless]]
 
[[File:anon_bpm_ss2_int_mez.jpg|frameless]]
  
−
== Actel Silicon Sculptor 3 ==
+
===mcmaster notes===
 +
 
 +
2018-09-12
 +
 
 +
*Open SS2
 +
*Think this was the eBay unit?
 +
*PCB is identical to one used in BP-1600
 +
*Both have blue bodge wire
 +
*SS2 has RAM installed
 +
 
 +
 
 +
==Actel Silicon Sculptor 3==
  
 
[[File:mcmaster_bpm_ss3_top.jpg|frameless]]
 
[[File:mcmaster_bpm_ss3_top.jpg|frameless]]
Line 405: Line 875:
 
This appears to be a crippled BP-1410 (however, it has the front-panel button and the 512MB of RAM present in the BP-1710).  No analysis has been done to figure out where the devices differ (firmware, FPGA, host, etc)
 
This appears to be a crippled BP-1410 (however, it has the front-panel button and the 512MB of RAM present in the BP-1710).  No analysis has been done to figure out where the devices differ (firmware, FPGA, host, etc)
  
−
Product page: [[http:''www.microsemi.com/products/fpga-soc/design-resources/programming/silicon-sculptor-3|http:''www.microsemi.com/products/fpga-soc/design-resources/programming/silicon-sculptor-3]]
+
Product page: [http://www.microsemi.com/products/fpga-soc/design-resources/programming/silicon-sculptor-3]
  
 
I love how they switched from roman numerals to Arabic numbers.  Maybe they'll call the next one Silicon Sculptor D…
 
I love how they switched from roman numerals to Arabic numbers.  Maybe they'll call the next one Silicon Sculptor D…
Line 415: Line 885:
 
Markings:
 
Markings:
  
−
<code>
+
  Silicon Sculptor 3
−
Silicon Sculptor 3
+
  Actel
−
Actel
+
  FAIL
−
FAIL
+
  ACTIVE
−
ACTIVE
+
  PASS
−
PASS
+
  START (button)
−
START (button)
+
  ACTEL DEVICE PROGRAMMER
−
ACTEL DEVICE PROGRAMMER
+
  BP MICROSYSTEMS
−
BP MICROSYSTEMS
 
−
</code>
 
  
−
\\
 
  
−
=== External ===
+
===External===
  
 
[[File:mcmaster_actel_ss3_ext_top.jpg|frameless]]
 
[[File:mcmaster_actel_ss3_ext_top.jpg|frameless]]
Line 435: Line 902:
  
  
−
=== Motherboard ===
+
===Motherboard===
  
 
Main assembly:
 
Main assembly:
Line 447: Line 914:
  
  
−
=== Power supply ===
+
===Power supply===
  
 
[[File:mcmaster_actel_ss3_ps1.jpg|frameless]]
 
[[File:mcmaster_actel_ss3_ps1.jpg|frameless]]
 
[[File:mcmaster_actel_ss3_ps2.jpg|frameless]]
 
[[File:mcmaster_actel_ss3_ps2.jpg|frameless]]

Revision as of 07:04, 3 October 2019


BP series

Vendor Model Year Motherboard

silkscreen

Motherboard

CPU

Motherboard

RAM

Motherboard

FPGA sticker

Card

Model

Tech adapter

silkscreen

Power supply Accessory Last BPWin Note
Actel SS2 2001 CPCB12A Rev. C Intel FC80486DX4100 Populated U5

W42MX24A BP MICROSYSTEMS 09/20/02

CPCBPD8B Rev B

2001

CPCBVLTA REV. B

2000

Button mcmaster
Actel SS3 2008-05-12
 WWAV12F

REV.F M0309


ASSY WWAV12F

Intel UG80486DX4100 SO DDR

Populated


CENTON

512 MB

CPCBPD8B Rev B

2001

SWG

CEM-??


CEL-22-LF000000006246

REV-A1

BPM 1148
BPM 1200 1992 BP-1200 Rev C AMD N80L286-16/S N/A CPCBPD8 Rev. D INTEGRATED POWER DESIGN
BPM 1400/84
BPM 1400

(1400/240)

CPCB11 Rev. G 80C286 CPCBTA240V REV. D 29203118-C2

REV-C C2

BPM 1410/84 2005 CPCBD03223 Rev. F

2005

Intel 80486DX4100 SO DDR

Unpopulated

N/A CPCBPD8B Rev B

2001

2002 BP MICROSYSTEMS Model?

Looks like SS3

CEL-22-000000001560

E145540, CS155-F3

HP-OK, REV A

mcmaster
BPM 1410

(1410/240)

BPM 1600 CPCB12A Rev. C Intel 80486DX4100 (handwritten)

MUS 28781

CPCBVLTA REV. B 29203118-C2

REV-C C2

5.33.0
BPM 1610
BPM 1700
BPM 1710
BPM 2000
BPM 2100
BPM 2200x4/240 1998 CPCB11 Rev. F

1998

Harris CS80C286-16 CPCBPD8A Rev D

1997

Top

CPCBTA240V REV. D

1996


Bottom

CPCBTA240V Rev. D

1996

29203118-C2

REV-C C2

4.73.0 mcmaster

REV vs Rev is inconsistent even on the same PCB...

BPM 2500
BPM 2510
BPM 2600
BPM 2600M
BPM 2610
BPM 2700
BPM 2700M
BPM 2710
BPM 2800F

General notes:

  • The following are the same basic hardware
    • BP-1400, BP-2200
    • BP-1410, SS3
    • BP-1600, SS2
  • Power supplies
    • Three generations


 (11:36:56 PM) Lord_Nightmare: the main processor [of the bp1200] is an 80286-16, with a 32mhz xtal
 (11:37:07 PM) Lord_Nightmare: [the board labeled] std48, it would [I assume] normally have [std48] printed on it nicely
 (11:37:22 PM) Lord_Nightmare: this one was a refurbished unit and i guess they used an unprinted metal case for that pcb
 (11:37:37 PM) Lord_Nightmare: std48 is the 'relay pcb' 
 (11:37:38 PM) digshadow: but whats the point
 (11:37:52 PM) Lord_Nightmare: i think it controls which pins are powered with what [rail] but am not sure
 (11:38:06 PM) digshadow: gotcha
 (11:38:07 PM) Lord_Nightmare: the bp1200 it is a 'separate' pcb on top of the unit
 (11:38:13 PM) digshadow: but its basically part of the unit right
 (11:40:54 PM) Lord_Nightmare: the bp1600 has the 'relay board' integrated as a board which sits on top of the rest of the inside of the unit inside the case
 (11:41:16 PM) Lord_Nightmare: i think the 1400 does as well
 (11:41:33 PM) Lord_Nightmare: while on the 1200 it sat on top of the unit
 (11:46:35 PM) Lord_Nightmare: the most basic bp unit was the bp-1148 "device programmer"
 (11:46:55 PM) Lord_Nightmare: note the case is identical to the 1200, and the only difference [in appearance] is 'universal' is blacked out on the wording
 (11:47:11 PM) Lord_Nightmare: http://vertassets.blob.core.windows.net/image/107fdcf5/107fdcf5-2dad-11d4-8c3d-009027de0829/bp1148.jpg
 (11:47:46 PM) Lord_Nightmare: that picture is a mockup, the std48 'layer' is missing
 (11:48:11 PM) Lord_Nightmare: http://thumbs.ebaystatic.com/d/l225/m/m1qMyAgqacqzlOo4KbeZLcw.jpg shows an actual 1148

ECO: WWAV20-4

  • http://www3.bpmmicro.com/web/helpandsupport.nsf/69f301ee4e15195486256fcf0062c2eb/66634b97cb53c22e8625703e0062b99a!OpenDocument
  • Effect 1: ECO: WWAV20-4 Effect 2: CPCB11 Rev A-F - TA-84 will occasionally fail relay test


http://www3.bpmmicro.com/web/helpandsupport.nsf/WebKeys/BPM-7Q2R96!OpenDocument

BP-1148, BP-1200, BP-2000, BP-2100, BP-2500, BP-2510, BP-2600M Final Software Version
Legacy Programmer Last Software Version Reference
Per the following document, the final BPWin version for the legacy programmers listed above is BPWin 4.73.

http://www3.bpmicro.com/Web/helpandsupport.nsf/WebKeys/BPM-6AHS6M?opendocument&Cat=FAQ

You can download BPWin 4.73 from our software download page by clicking the "BPM Legacy Software Download" link in the upper-left corner of the page.

BP-1200

Ln bpm bp-1200 unit top.jpg Ln bpm bp-1200 unit top relay.jpg

Ln bpm bp-1200 relay btm.jpg Ln bpm bp-1200 unit btm.jpg Ln bpm bp-1200 unit side.jpg

Ln bpm bp-1200 pcb0.jpg Ln bpm bp-1200 pcb1.jpg Ln bpm bp-1200 ps.jpg

Ln bpm bp-1200 cpcbpd8 d back.jpg Ln bpm bp-1200 cpcbpd8 d front.jpg


PC interface: parallel port

Chip interface: 2 plug SM

http://atariage.com/forums/topic/142884-bp-microsystems-eprom-programmer-a-cry-for-help/

  • IF you get a TA-84 pin driver module (and a SM48D 48-pin DIP module, but NOT the one that comes with the BP-1148) it will convert your BP-1148 to a BP1200/84.

BP-1400

PC interface: parallel port

Chip interface: 3 plug SM

BP-1400/84: [1]


BP-1400/240: [2]


EOL notice

http://www3.bpmmicro.com/web/helpandsupport.nsf/WebKeys/BPM-7AUPV7!OpenDocument&Cat=Issue&Click=

End of Life for 1400 and 2200 model programmers

Summary BPM announces the planned end of support for the 1400 and 2200 model programmers on December 31, 2008. Introduced in 1996 and discontinued in 2005, the 2200 and 1400 were the first in the industry to enable fine control of programming waveforms for the highest quality programming with the widest device support capabilities. Limitations of the original programmers hardware combined with new software compatibility and component obsolescence forces this end of support announcement.

Details End of support means that BPWin software released in 2009 will not support the 1400 and 2200 model numbers. These models can continue to function with existing BPWin software released prior to 2009, but will not be eligible for additional algorithms or updates to existing algorithms. Hardware contracts will also not be available for these programmers. Also, repairs and calibration of these programmers are no longer possible.


Motherboard

Pd bpm bp-1400 mb1.jpg Pd bpm bp-1400 mb2.jpg

Mezzanine board:

Pd bpm bp-1400 mez top.jpg Pd bpm bp-1400 mez btm.jpg


Power supply

Pd bpm bp-1400 ps.jpg


BP-1410

BPM BP-1410

External:

Mcmaster bpm bp-1410 ext btm.jpg Mcmaster bpm bp-1410 ext side.jpg Mcmaster bpm bp-1410 ext top.jpg

Power supply:

Mcmaster bpm bp-1410 ps overview.jpg


PC interface: USB

Chip interface: 3 plug SM

BP-1410/84 datasheet: [3]

BP-1410/240 datasheet: [4]

Motherboard

Mcmaster bpm bp-1410 mb overview.jpg Mcmaster bpm bp-1410 mb usb off2.jpg

Motherboard USB connector:

Mcmaster bpm bp-1410 mb usb off.jpg Mcmaster bpm bp-1410 mb usb on.jpg


BP-1600

External:

Mcmaster bpm bp-1600 top.jpg Mcmaster bpm bp-1600 btm.jpg Mcmaster bpm bp-1600 side.jpg


PC interface: parallel port

Chip interface: 3 plug SM

BP-1600 datasheet: [5] 

 1400 has a 286 and the 1410 a 486
 1600 supports 1.5V parts
 5000 more devices (probably a lot more by now)

Motherboard:

Mcmaster bpm bp-1600 mb1.jpg Mcmaster bpm bp-1600 mb2.jpg Mcmaster bpm bp-1600 mb parallel off.jpg

CPCD12A Rev. C

CPU 

 intel
 Intel DX4
 iCOMP TM index=435
 PC80486DX4100
 L124EA01
 &EW 3VOLT SL2M9
 INTEL (M)(C) '89 '94

Connectors are numbered with 1 at the side of the top or left of the PCB, oriented such that writing is right side up (ie side with blue trim pot)

J10 (Fan, N/C)

# V Note
1 N/C?
2 16.5
3 0
4 N/C?

J11 (Term. 1, N/C)

# V Note
1 0.0
2 1.1
3 0.25
4 5.1


J12 (Term. 2, N/C)

Was this supposed to be identical to above? Broken?

# V Note
1 0.0
2 0.0
3 0.0
4 0.8

Voltage header

Label V Note
+5V 5.1
+3.3V 3.3
GND 0.0
-3.5V -3.5
-5V -5.0
GND 0.0
+2.5V 2.5
PGD 4.1
VTH 1.6


Power supply

Mcmaster bpm bp-1600 ps.jpg Mcmaster bpm bp-1600 ps overview.jpg

J4 (12V fans...wtf?)

# Color V Note
1 Red 35.4
2 Red 16.5
3 Black 0.0
4 Black 5.3

J5 (to MB J4 or J20)

# Color V Note
1 Purple 35.4
2 Orange 16.5
3 Black 0.0
4 Red 5.3

J6 (to MB J4 or J20)

# Color V Note
1 Purple 35.4
2 Orange 16.5
3 Black 0.0
4 Red 5.3


BP-2200

"Concurrent Programming System"

PC interface: parallel port

Chip interface: 4X 3 plug SM

BP-2200 datasheet: [6]


Parallel to USB upgrade

Main page: bpm_WWAVUSBEPP


USB hub

Used on gang programmers

Anon bpm wwavusbhub 1.jpg

Anon bpm wwavusbhub 2.jpg

Anon bpm wwavusbhub 3.jpg

EP series

EP-1

PC interface: parallel port

Chip interface: DIP

EP-1132

PC interface: parallel port

Chip interface: DIP-

EP-1140

PC interface: parallel port

Chip interface: DIP-40

PLD series

PLD-1128

PC interface: parallel port

Chip interface: DIP-28

CP series

CP-1128

PC interface: parallel port

Chip interface: DIP-28

Silicon Sculptor

Actel programmers made by BPM.

As these cost less than the "real" BPM programmers, presumably can't be used with normal BPM software and/or work with other adapters

Silicon Sculptor 1

Has 2 headers (left/right) that adaptors plug into

Interface: parallel port

There is version with 1 connector and a version with 6 connectors

1X markings 

 Silicon Sculptor
 FAIL
 ACTIVE
 PASS
 START
 ACTEL DEVICE PROGRAMMER
 BP MICROSYSTEMS

Silicon Sculptor 2

http://www.actel.com/kb/article.aspx?id=SL1039

  • WWAV20 motherboard with pin driver boards (PD8As)
  • 286 processor
  • 2MB onboard RAM
  • an additional 4MB SIMM to support concurrency


Markings: 

 Silicon Sculptor II
 Actel
 FAIL
 ACTIVE
 PASS
 ACTEL DEVICE PROGRAMMER
 BP MICROSYSTEMS

Anon bpm ss2 ext.jpg

Anon bpm ss2 ext btm label.jpg

Anon bpm ss2 int mb1.jpg Anon bpm ss2 int mb2.jpg Anon bpm ss2 int mb3.jpg Anon bpm ss2 int mb4.jpg Anon bpm ss2 int mb5.jpg Anon bpm ss2 int mb6.jpg

Anon bpm ss2 int driver.jpg

Anon bpm ss2 simm.jpg

Anon bpm ss2 int mez.jpg

mcmaster notes

2018-09-12

  • Open SS2
  • Think this was the eBay unit?
  • PCB is identical to one used in BP-1600
  • Both have blue bodge wire
  • SS2 has RAM installed


Actel Silicon Sculptor 3

Mcmaster bpm ss3 top.jpg

Above: DO NOT TOUCH!

This appears to be a crippled BP-1410 (however, it has the front-panel button and the 512MB of RAM present in the BP-1710). No analysis has been done to figure out where the devices differ (firmware, FPGA, host, etc)

Product page: [7]

I love how they switched from roman numerals to Arabic numbers. Maybe they'll call the next one Silicon Sculptor D…

Has 3 headers (left/right/top) that adaptors plug into

Interface: USB

Markings: 

 Silicon Sculptor 3
 Actel
 FAIL
 ACTIVE
 PASS
 START (button)
 ACTEL DEVICE PROGRAMMER
 BP MICROSYSTEMS


External

Mcmaster actel ss3 ext top.jpg Mcmaster actel ss3 ext btm.jpg Mcmaster actel ss3 ext side.jpg


Motherboard

Main assembly:

Mcmaster actel ss3 mb1.jpg Mcmaster actel ss3 mb3.jpg

Driver board:

Mcmaster actel ss3 cpcbpd8b rev b.jpg


Power supply

Mcmaster actel ss3 ps1.jpg Mcmaster actel ss3 ps2.jpg

Retrieved from "https://proghq.org/wiki/index.php?title=BPM_Programmer&oldid=661"