Signature

From Proghq
Revision as of 17:47, 12 August 2018 by Mcmaster (talk | contribs)
Jump to navigation Jump to search

Documents signature bytes used on EPROM, AT89C51, 87C51, etc.

TODO:

- Is 87C51 and 89C51 signature protocol the same?
- Do mcs51 mask ROM parts support signature?
- Are EPROM signatures compatible with mcs51 signatures?

JEDEC

https://www.jedec.org/standards-documents/docs/jep-106ab

Think these are flash specific

"JEDEC SOLID STATE TECHNOLOGY ASSOCIATION"

"The intent of this identification code is that it may be used whenever a digital field is required, e.g., hardware, software, documentation, etc."

89C51 family

IDs are found at special NV memory address 0x30-0x32

Sig (hex) Vendor Chip label Die ID Notes
1E51FF Atmel AT89C51 19052
9ED100 Atmel AT89C51 19651
1E52FF Atmel AT89C52 (19652) Die ID was for a AT89C52, but not verified to have the same signature words

87C51 family